It is not necessary that the coatings are used only to protect the surface of the wide variety of impacts, with appropriate coatings, which are available in a wide range of colors and with expertise we can create interesting decorative effects. Therefore, the renewal of wall surfaces allow our imagination free time. Internal wall surfaces are exposed to different stresses, the walls in corridors, stairwells, in the waiting room, etc.., much more quickly they become dirty and are mechanically damaged as the walls in the bedrooms and in rooms where people stay for shorter time and activities are different. On type of coating and its quality it depends, how frequent wall surfaces should be painted. SPEKTRA DOMFLOK pearl lacquer is highly washable decorative coating, which allows the manufacture of a variety of decorative techniques and is also intended for high wear internal wall surface - for pubs, corridors, living rooms and all the other rooms in which we want to have a decorative appearance on the walls. Decorative techniques made with SPEKTRA DOMFLOK pearl lacquer have glossyy or partially glossy final appearance. As the decorative effect depends on all works procedures, and not only from the final layer, it is very important for quality appearance of decorative techniques that the complete system of performance is made professionally!
Description of one of the decorative techniques - relief coarse decorative technique
The old returns, but with new materials. On the market it is evident that consumers are increasingly tending to equip interiors to look warm. They use for equipment stylistic and old furniture, frequently they forget the appearance of walls, which are a dot of i in providing welfare. Application of a rough relief technique 1. step: A suitably cleaned surface should be impregnated with SPEKTRA acrylic impregnation thinned in ratio 1:1 with water. 2. step: Puttying with SPEKTRA rough interior putty, which is usually intended for first coat to smoothened ceiling and wall surfaces with a trowel, To impregnated surface we apply SPEKTRA rough interior putty in thickness as for normal puttying. We get relief structure in such a way that we press trowel to putty and draw optionally in all directions. Vacuum created between fresh putty and a trowel makes a trace in a putty and the result is an uneven relief sample. You can make a sample in a fresh putty with a brush or spatula putty. 3. step: Painting of surface with SPEKTRA interior washable wall paint in two coats with a roller. Paint should be applied evenly in a thin coat, so that paint will not float the putty structure. Thining of paint up to 10 % with water. The desired colour shade of SPEKTRA interior washable paint you can choose according to colour card MONICOLOR 720, NCS, RAL and EUROTREND. They will prepare it for you in all shops with the mixing system HELIOMIX. 4. step: Painting of surface with SPEKTRA DOMFLOK lacquer in one coat. The surface should be painted because of decrease in permeability, easier preparation of next coat and final washability. 5. step: Clean surface coat of SPEKTRA interior washable paint with a cloth or sponge. At the manufacture of colour effect with a cloth it is necessary to apply paint evenly on lacquered surface approx. 1 m². At the application of paint care should be taken that passing of paint from one field to the other are not visible, therefore you should at each immersion of a cloth and production of the new field return with a dry cloth to the preceding field. Hereby the passings are eliminated and surface has even spots. Final appearance: Area of application: For protection and decoration of interior wall surfaces in pubs, corridors, halls, living rooms, wine cellars and other rooms, where we wish to have a decorative effect.
Characteristics:
With our products we can make numerous different decorative techniques. The main are presented in the catalogue: Decorative techniques (SLO, PDF; 2.1 Mb) back to top
