SPEKTRA heat insulating system combines the products for the protection and decoration of facade surfaces. With the colours of plasters you express your personality, revive the architecture of the buildings, care for energy saving, preserve the value of the bulding, improve the quality of residence in a pleasant and healthy atmosphere of your home and protect the environment. SPEKTRA heat insulating systems have the European technical approval ETA-08/0122 for the system EPS and ETA-08/0078 for the system MW. The information serve as general directives and can not be the guarantee, because they do not consider specific or actual cases of use.
Remarks:
during the time of all phases of installation and drying the temperature of the environment, surface and material should be at least +5 °C (in silicate plasters at least +8 °C);
the installation is not allowed at the temperature of the environment, surface and material over +30 °C (in silicate plasters +27 °C);
weather circumstances (rain, fog, wind, direct sun) have negative influence on drying and curing, therefore it is necessary to use protective linen (linen for scaffolds);
it is necessary to consider the time for drying and binding of materials; you should also take into consideration that further to uneven substrate and human factors, which have influence on final appearance and quality of performance works also negative weather influences essentially prolong the drying time;
it is not allowed to add other additives to basic materials, adhesives, masses and plasters also the mixing of materials is not permitted;
the selection of colour also has construction-physical consequences; dark colours absorb heat more intensively in comparison to light colours, wall heats up more and the thermic stress of the plaster is therefore higher; the value of light repulsion, quocient of repulsion (value HBW) indicates the share of light, which will reflect from the substrate (100 % = white; 0 % = black). For different facade systems there are different requirements, on general for the facade with heat insulating system HBW at the selection of colour of to coat should not be under 25 % (Y-value).
1. SPEKTRA adhesive for mineral wool, SPEKTRA adhesive for styropore 2. facade MW-lamella, facade styropore plate (EPS-F) 3. SPEKTRA adhesive for mineral wool, SPEKTRA adhesive for styropore 4. reinforced glass mesh 5. SPEKTRA adhesive for mineral wool, SPEKTRA adhesive for styropore 6. SPEKTRA universal basic coat 7. SPEKTRA plasters - acrylate and silicone
back
