New technique of stains gives excellent results. For their achievement we use products of trademarks TESSAROL and BORI. At the renovation of wooden surfaces, which got grey due to influence of sun and rain or got dark due to several renovations with the same shade of a stain, we usually have only one possibility: We can renovate them only with top coats. Yet the new technique of stains enables us that grey or darkened wood appears like a new one; this is evidently light wood with visual texture. The pictures 1, 2, 3 show natural shade of pinewood, protection of new pinewood (1 × BORI impregnation, 2 × BORI stain UV PROTECTION pine) and darkened pine wood after renovation with use of stains technique. Picture 1: Natural shade of pine Picture 2: 1 × BORI impregnation, 2 × BORI stain UV PROTECTION pine Picture 3: After renovation – used stains technique Picture 4: TESSAROL acrylic primer for wood, BORI stain UV PROTECTION cherry
At the application we use the already known products in the markets of trademark TESSAROL and BORI: TESSAROL acrylic wood primer and BORI stain UV PROTECTION and the known manual technique. Visual wood texture we get with the use of special tools – decorative pads (picture 6), which gives optical effects, that are very similar to natural wood texture. The similar appearance we get with the use of hard brush, the final result is »renovated« wood with visual texture. The technique with stains we can use at renovation of fences, pergolas, windows, doors and also panellings …
As with every renovation of wood, it is first necessary to remove old, crumbly coats with brushing and clean surface from dust and other impurities (picture 7). If wood is very damaged, first apply impregnation BORI impregnation, then 1–2x TESSAROL acrylic wood primer in the selected colour shade (picture 8). Sand primer and apply with a brush BORI stain UV PROTECTION in the selected colour shade (picture 9) and due to quick drying BORI stain UV PROTECTION timmediately after the application with a brush we make a visual wood texture – by means of a decorative pad (picture 10). A similar appearance we get also with the use of a hard brush (picture 11). Afterwards we still once (after 4–6 hours) apply with a brush BORI stain UV PROTECTION (picture 12). Picture 5: TESSAROL acrylic wood primer, BORI stain UV PROTECTION pine Picture 6: Decorative pad Work procedure: Picture 7: Removal of old coats Picture 8: Impregnation with BORI impregnation and application of TESSAROL acrylic wood primer in a colour shade – X136 or X098 Picture 9: Application of BORI stain UV PROTECTION with a brush Picture 10: With a decorative pad we get a visual wood texture Picture 11: A similar appearance we get with a hard brush Picture 12: Application of BORI stain UV PROTECTION with a brush Descriptions of the used coats:
TESSAROL acrylic wood primer is a top primer for protection of different wood surfaces such as doors, windows, fences, wooden constructions, different panellings in interior rooms and in the exterior. As it is produced on basis of water binder, it contains a very little amount of solvents, it has no unpleasant odour, it is thinned with water, dries quickly and offers good sanding. Next coat under optimal conditions (T = +20 °C, rel. hum. 65%) follows after 4–6 hours. BORI stain UV PROTECTION is intended for protection and decoration of wood in interior and exterior: building joinery, panellings, pergolas, garden sets, garden houses … BORI stain UV PROTECTION gives a transparent coating, which stresses wood natural appearance and offers good protection against weather influences. As it is produced on basis of water binder, it contains a small amount of solvents, it has no unpleasant odour, it is thinned with water and dries quickly, The next coat under optimal conditions (T = +20 °C, rel. hum. 65%) will follow after 4–6 hours. back to top
